服務熱線：手機號碼：19121166298
地 址：上海市北京東路668號科技京城東樓27樓C1室
BALLUFF微脈沖位移傳感器選型
更新時間：2017-05-03 點擊次數：950次
概覽
型材結構
桿式結構
在惡劣環境下測量長位移的。
微脈沖位移傳感器型材結構應用示例
插接器與連接導線 微脈沖位移傳感器 自由式或引導式位置傳感器
微脈沖位移傳感器桿式結構應用示例
插接器與連接導線 微脈沖位移傳感器 位置傳感器，浮子
如需在惡劣環境下對長位移進行*與 可靠的測量，則應采用微脈沖位移 傳感器。其高精度輸出信號作為信號， 能通過各個不同的接口提供給控制系統。 其非接觸式作用原理能夠保證 無磨損。
優勢
高分辨率、高重復性和高線性
抗震動、抗干擾場
應用
探測液壓驅動裝置 (如風力發電設備) 的 活塞位置
監測注塑機或加工中心內的 線性運動
監控配料及混合單元內的料位
微脈沖位移傳感器 - 貼合 您的要求
Keyfeatures
| Connection | Connector, M12 |
|---|---|
| Multi-magnet technology | yes |
| Operating voltage | 10...30 V DC |
| For dynamic loop applications | No |
| Interface | Analog interface, current |
| Design | Series Profile |
| Approvals | CE, cURus |
General attributes
| Short-circuit protected | to GND and to 36 V DC |
|---|---|
| Enclosure Type per IEC 60529 | IP67 (with connector) |
| Protected against polarity reversal | Up to 36 V |
| No of magnets, factory setting | 1 |
| Trade name | Micropulse® |
Electrical attributes
| Connection type | Connector |
|---|---|
| Output signal | 4…20 mA and 20…4 mA |
| Galvanic isolation | No |
| Interface | Analog |
| Ripple | 0.5 Vpp |
| Current consumption (at 24 V DC) | ≤ 180 mA |
| Inrush current | ≤ 500 mA / 10 ms |
| Overvoltage protected | Up to 36 V |
| Voltage-proof (GND – housing) | 500 V AC |
| Output signal adjustable | With software tool |
| For dynamic loop applications | No |
| Number of magnets max. | 2 |
| Programming inputs | for USB configuration box |
| Interface | Analog interface, current |
| Error signal Ia rising | 3.6 mA |
| Error signal Ia falling | 3.6 mA |
| Operating voltage | 10...30 V DC |
Mechanical attributes
| Connector type | M12 |
|---|---|
| Ambient temperature Ta min. | -40 °C |
| Ambient temperature Ta max. | 85 °C |
| Housing material | Anodized aluminum |
| Number of pins | 8 |
| Version | Type P |
| Mounting type | Mounting clamps |
| Nominal stroke | 150 mm |
| Repeat accuracy | ±5 µm |
| TK, typ. (at 50% of 500 mm) | ≤ 30 ppm/K |
| Storage temperature min. | -40 °C |
| Storage temperature max. | 100 °C |
| Relative humidity | < 90 %, non-condensing |
| EN 60068-2-27 (shock) | 150 g / 6 ms |
| EN 60068-2-29 (cont. shock) | 150 g / 2 ms |
| EN 60068-2-6 (vibration) | 20 g, 10…2000 Hz |
| EN 60068-2-64 (noise) | 20 g, 10…2000 HZ |
| EN 55016-2-3 (emission) | Indust. and residential area |
| EN 61000-4-2 (ESD) | Severity Level 3 |
| EN 61000-4-3 (RFI) | Severity Level 3 |
| EN 61000-4-4 (burst) | Severity Level 3 |
| EN 61000-4-5 (surge) | Severity Level 2 |
| EN 61000-4-6 (HF fields) | Severity Level 3 |
| EN 61000-4-8 (magnetic fields) | Severity Level 4 |
| Cable/connector out | Axial |
| Null point | 72 mm |
